Customization of Non-standard Components and Devices

Suitable for continuous steel tape lapping and armoring of power cables with metal sheaths;

this unit uses polyethylene, polyvinyl chloride and other materials through hot extrusion method to make the wire core insulation or cable sheath of the wire unit.

This unit adopts variable frequency synchronous speed control and a four-stage variable speed traction machine to achieve high-speed production of small wire diameters. It triples the production efficiency of ordinary models and doubles the efficiency of large wire diameters. It is an updated model.

Due to the continuous rise in copper prices, which have remained at a high level without any downward adjustment, the high prices of copper cables have made it difficult for end-users or users to accept, seriously affecting cable sales.

Product model: DF-M-30

Measuring method: circle counting, layer counting, meter counting

Size (CM): 71 x 39 x 51

Product power supply: 110V--220V

Weight(KG):14KG

Speed (r/min): 5-1000r/min

Product features: high temperature resistance and corrosion resistance 

Product specifications: processing and customization 

Product introduction: Graphite crystallizer is a ring-shaped mold made of graphite material, usually with a circular or elliptical cross-section, hollow inside, which can accommodate the melt for crystallization operation. The carbon content is 99.99%, the density can be above 1.9, and the tolerance of graphite parts is about 0.1mm.

Model: 3mm--50mm and above steel nail cable clips

Description: Used for automatic assembly between steel nails and cable clips, with a speed of about 300 per minute, stable performance and easy operation. 

Introduction: This machine is a fully automatic steel nail cable clip assembly machine carefully designed for factories specializing in the production of steel nail cable clips. It adopts microcomputer control, automatic nailing and material loading, automatic shutdown when there are no nails or materials, voice-controlled alarm, automatic operation when there are nails and materials, no manual switch operation is required, fully intelligent control, energy saving, low noise, high efficiency, and simple operation.